Lebenn - Rebooting the workforce    
NewIncredible offer for our exclusive subscribers!Read More
38°C
October 2, 2023
Tech

Troubleshooting Guide to Fix Netgear Router Not Working Issue

  • June 24, 2022
  • 4 min read
  • 275 Views
Troubleshooting Guide to Fix Netgear Router Not Working Issue

Built with precision and high-tech technology, Netgear wireless routers are one of the leading networking devices nowadays when it comes to providing a seamless internet connection to users. Probably, that is why a good amount of people have started setting up Netgear routers in their homes.

However, recently, we have been getting complaints regarding some issues that users have been experiencing with their Netgear routers. And sitting on the top shelf is the Netgear router not working issue.

As a Netgear router user, are you also stuck with the same thing? Well, know that you have nothing to worry about. The reason being, the troubleshooting hacks mentioned in this post will help you fix the issue at hand. Thus, stick to reading.

Fixed: Netgear Router Not Working Issue

  1. Give Your Netgear Router

There is no shame in accepting that you are facing the Netgear router not working issue because of a reason as simple as technical glitches. But, here’s the good news: these glitches can be eliminated if you reboot your wireless device.

Rebooting your router is possible if you go through the following steps:

  • Disconnect your Netgear WiFi router from the existing modem.
  • Unplug the power cable connecting your router to the adapter.
  • Hold on for a couple of seconds.
  • Thereafter, plug the power cable to reconnect your Netgear router to the adapter.
  • Do not forget to re-establish a connection between your router and modem.

Now, see if you have gotten rid of the Netgear router not working issue. If you have not, then following the next hack might do you some good.

  1. Use the Correct Login Credentials

Many times, users are unable to access the routerlogin.net setup page and declare that are facing the Netgear router not working issue. This usually happens when they make use of an incorrect username and password to perform Netgear router login.

Are you making the same mistake? Check once. If you are, then rectify it by entering the correct login credentials. If you need to help in re-confirming them before inputting them, then it is recommended that you refer to the user manual.

  1. Bring Your WiFi Devices Closer

Another reason why your Netgear wireless router is not working properly is because it is placed far from the existing modem. To troubleshoot the issue, all you need to do is, pull your wireless devices close to each other.

But, not too close. Otherwise, their WiFi signals might clash and lead you to further technical issues in the future. And you wouldn’t want that, would you?

  1. Reset Your Netgear Router

If you are reading this troubleshooting hack, then it is quite obvious that you are still stuck with the Netgear router not working issue. To troubleshoot it, you are left with only one hack. And that is, performing factory default reset.

Following are the instructions that you can walk through in order to reset your device:

  • First of all, make sure that your router is getting enough electricity.
  • Locate the Reset button on your Netgear Nighthawk router.
  • When located, waste no more in pressing it.
  • Wait.

Done resetting your device? Now, reinstall it by accessing the routerlogin.net login page. If you don’t want to perform Netgear router setup using the Manual method, you can use the Nighthawk application instead.

Wrap Up

Coming across the Netgear router not working issue is not something to worry about. Even the best of devices can cause issues sometimes. Anyway, we hope that after going through the aforementioned hacks, troubleshooting this issue will become easy for you.

If you would like to share your feedback regarding this article with your fellow readers and us, then drop by the comment section.