NewIncredible offer for our exclusive subscribers!Read More
October 17, 2021

How to Perform Netgear EX3700 Setup Using WPS Method?

  • October 15, 2021
  • 3 min read
How to Perform Netgear EX3700 Setup Using WPS Method?

When it comes to a seamless internet, Netgear has always been at par. If you want to enjoy blazing-fast internet in every corner of your home, then perform the Netgear EX3700 setup. Netgear EX3700 comes with 750Mbps (Megabits per second) speed and dual bands. This means, regardless of where you’re sitting in your house, you won’t face any issue in accessing the internet.

Now, you might be wondering how to perform Netgear EX3700 setup? Well, there are various ways through which you can set up the Netgear extender in your home. But, in this article, we’ll talk about the easiest setup method – WPS Method. Read further to know how to perform the Netgear EX3700 setup using the WPS method.

Steps to Set Up Netgear EX3700 Extender Using the WPS Method

The WPS method stands for WiFi protected setup method that is the easiest method to install Netgear EX3700. You can also use this method if you get an error message like not working while performing setup using Network Installation method. To perform Netgear EX3700 setup using the WPS method, follow the steps mentioned below:

1. Unbox your Netgear WiFi Range Extender

Unbox your brand new Netgear WiFi range extender. While unboxing, you will find a user manual, Ethernet cables, and antennas.

Note: Be careful while unboxing so that none of the parts of your Netgear WiFi extender gets damaged.

2. Turn On Your Netgear EX3700

  • Plugin your Netgear EX3700 range extender into a working wall socket.

  • Switch on the Power button.

  • Wait for some time till the Power LED on your Netgear EX3700 becomes solid green.

3. Set Up Your Netgear WiFi range Extender

  • Locate the WPS button on your EX3700 WiFi range extender.

  • Once found, press the WPS button on your Netgear EX3700.

  • Press the button for some time before releasing it.

  • Now, relocate your Netgear WiFi range extender.

  • Take your WiFi-enabled device to a location with poor internet service and test the connection of your extender.

  • Now, enjoy a super-fast internet with 750Mbps speed.

By following these steps, you can perform the Netgear EX3700 setup using the WPS method.

While setting up your Netgear extender, you may face some issues. Following are the common issues that you might face while performing Netgear EX3700 setup using the WPS method:

  • Netgear EX3700 extender is connected but has no internet.

  • The LED lights on the Netgear extender are not stable.

  • Netgear EX3700 drops internet connection.

  • Can’t access the web address of Netgear EX3700.

  • Netgear extender’s network name is not visible.

  • Netgear EX3700 not working.

  • The Power LED on Netgear EX3700 turns red.

Regardless of whatever issues you’re facing during the Netgear extender setup process, the following steps will help you fix them.

Quick Tips to Troubleshoot Netgear EX3700 Setup Issues

  1. Confirm that you have plugged your Netgear WiFi range extender into a working wall socket.

  1. Make sure that your EX3700WiFi range extender is receiving enough power supply.

  1. Check all the wired connections and don’t use damaged cables.

  1. Keep your Netgear extender away from microwave ovens, Bluetooth devices, mirrors, fish tanks, walls, metallic objects, and corners.

  1. Power cycle your Netgear WiFi range extender if the LED lights on it are not stable.

  1. If such issues continue, restore the Netgear EX3700 WiFi range extender to its factory default settings.


With the above easy steps, you can perform the Netgear EX3700 setup using the WPS method. If you face any issues during the setup process, you can refer to the quick troubleshooting tips discussed above. If you liked this piece of reading, then leave a word of appreciation in the comment section.

Leave a Reply