Lebenn - Rebooting the workforce    
NewIncredible offer for our exclusive subscribers!Read More
November 28, 2023

Detailed Guide to Fix Netgear Nighthawk Router Red Light Issue

  • December 13, 2021
  • 4 min read
Detailed Guide to Fix Netgear Nighthawk Router Red Light Issue

Every LED light on your Netgear Nighthawk router has a different meaning. If the LED on your wireless device is blinking green, it means your device is working well. However, if the LED on your router is blinking red, then you are in some trouble. But, worry not. Every problem has a solution. This one has too. So, follow the troubleshooting tips mentioned in this post and learn how to get rid of the Netgear router red light issue. 

Troubleshooting Netgear Router Red Light Issue

  1. Reboot Your Netgear Router

The first thing that you need to do is, reboot your Netgear wireless router. Maybe, all that your home router needs in order to troubleshoot the red light issue is a simple restart. 

In order to reboot your Nighthawk device, unplug it from the power source, wait for a couple of seconds, and then, plug it back into the power source.

  1. Contact Your Internet Service Provider

If even after rebooting your Netgear Nighthawk router, you are experiencing the red light issue, is recommended that you get in touch with your Internet Service Provider.

If he says that there is an internet issue from his side, then ask him to get it fixed as soon as possible.

  1. Perform Netgear Firmware Update

If the firmware of your Netgear Nighthawk router is not running on an updated version, it is advised that you update it now.

In order to update the firmware of your wireless device, here are the instructions that you need to go through:

  • Open an internet browser on your WiFi-enabled device.
  • Type routerlogin.net in the URL bar of the browser.
  • Press the Enter key.
  • You will be taken to the Netgear Nighthawk router login page.
  • Once logged in, go to Settings, and click Maintenance.
  • Select Firmware Update and go through the on-screen prompts.

In this manner, you’ll be able to perform Netgear router firmware update in a hassle-free manner. If you have an extender and want to update its firmware too, then it is advised that you access the Netgear WiFi extender setup wizard.

  1. Verify the Ethernet Connection

A weak Ethernet connection between your Netgear Nighthawk router and the existing modem can also be one of the major reasons why you are struggling with the red light issue. 

To troubleshoot it, check the Ethernet cable. If it is damaged from anywhere, do not waste any more time in replacing it with a new one.

  1. Reset Your Nighthawk Router

If even after following the aforementioned troubleshooting tips, you are facing the Netgear router red light issue, it is high time you perform factory default reset.

To restore your wireless router to the factory default settings, follow the below-given steps carefully:

  • Look for the Reset button located on your Netgear router.
  • Once located, press it using a pointed object.
  • Wait for some time.

In this way, you’ll be able to reset your Netgear Nighthawk router using the Reset button. 

Once you are done with the reset process, perform Netgear Nighthawk router setup from scratch.

Note: You can also restore your Netgear Nighthawk router to the factory default settings by accessing the routerlogin.net page.

Summing Up

The red light issue is one of the most common issues that users face with their Netgear Nighthawk routers. However, if you take the help of the troubleshooting tips mentioned above, you will surely be able to troubleshoot it. If you do, do not forget to leave a word of appreciation in the comment section. 

Also, if to your knowledge, there is some other way through which you can get rid of the red light issue, don’t mind sharing it with us.