NewIncredible offer for our exclusive subscribers!Read More
38°C
January 24, 2022
Tech

Complete Guide to Troubleshoot Netgear Router Red Light Issue

  • December 31, 2021
  • 3 min read
  • 41 Views
Complete Guide to Troubleshoot Netgear Router Red Light Issue

Netgear WiFi routers are one of the best networking devices ideal for bandwidth-hungry activities like playing online games and live video streaming. However, recently, users have been facing various issues with their wireless routers. And one such issue is, Netgear router blinking red.

Are you experiencing the same issue with your Netgear WiFi router? If you are nodding your head in yes, worry not! The reason being, the troubleshooting tips mentioned in this post will surely help you resolve the Netgear router red light issue. So, keep reading.

Why is Netgear WiFi Router Blinking Red?

Before you learn how to troubleshoot the Netgear router red light issue, you need to understand about the various reasons that might have led you to it.

Mentioned below are some of the topmost factors contributing to the red light issue:

  • Corrupted or outdated firmware
  • Hardware damage
  • Insufficient power supply
  • Weak internet connection
  • WiFi connection is overlapped
  • Technical glitches

Now, you can walk through the steps mentioned below and get to know how to resolve the Netgear router red light issue.

Fixed: Netgear Router Red Light Issue

  • Reboot Netgear Router

Start by restarting your Netgear wireless router. In order to reboot your Netgear router, you need to follow the below-mentioned guidelines:

  • Disconnect every client device connected to your home router.
  • Power off your router and unplug it from the wall outlet.
  • Wait for some time.
  • Plug your Netgear router back into the socket and turn it on.

Now, check whether you are facing the red light issue or not. If you are, continue reading.

  • Perform Netgear Firmware Update

Updating the firmware of your device can also help you get rid of the Netgear router red light issue. So, take the help of the steps given below and learn how to perform Netgear router firmware update:

  • Switch on your computer.
  • Open a web browser.
  • In the URL bar, type routerlogin.net.
  • Press the Enter key.
  • On the Netgear router login page, fill in the default login credentials.
  • Click Log In.
  • Go to Settings > Maintenance.
  • Select Firmware Update.

By following these instructions, you will be able to perform Netgear firmware update.

  • Verify Ethernet Connection

As mentioned above, if the Ethernet connection between your Netgear router and the existing modem is not damage-free, then also you can come across the red light issue.

Therefore, make sure that the Ethernet cable connecting your devices is not worn out or damaged from anywhere.

  • Perform Factory Default Reset

If none of the aforementioned tips have worked for you so far, it is recommended that you perform factory default reset.

Here is how to restore your Netgear router to the factory default settings:

  • Look for the Reset button located on your router.
  • Carefully press it using an oil pin once you find it.
  • Wait for a couple of seconds.

After resetting your device, reconfigure it by accessing the 192.168.1.1 default IP address.

  • Bring a Netgear Extender Home

Are you struggling with the Netgear router red light issue? If that is the case, then it means there is something wrong with your router itself.

To troubleshoot the issue, either get your current router fixed or bring an extender home. If you bring an extender home, configure it by accessing the Netgear extender login page.

Final Words

We hope that after following the aforementioned troubleshooting tips, you will be able to resolve the Netgear router red light issue in a hassle-free manner.

If you are aware of any other way through which the red light issue can be fixed, it is advised that you share it with us via the comment section. We would love to learn something new.

essay writing service | write my essay