Have you purchased a Netgear EX3700 extender to enjoy seamless internet coverage in every corner of your home? If so, we must say that you have made the right decision. EX3700 is one of the best extender models helping you intensify the signals of your current WiFi router and use the internet like never before. However, to make the most of the device, you first need to complete the Netgear EX3700 setup. This is where the post is going to help you. Here, we have jotted down various steps explaining how to set up a Netgear extender in a matter of minutes. So, let’s get started.

How to Do Netgear EX3700 Setup Using Manual Method

Although Netgear EX3700 extender can be configured using various methods, however making the device operational using the manual method is one of the most reliable and efficient ways. So, check the points below to know how to make the Netgear EX3700 extender up and running using the manual method:

• Once you are all done with unwrapping your EX3700, the very first thing you need to do is to place the device at the right location.

Quick Tip: To avoid any issues while doing the setup of your Netgear EX3700, it is suggested that you place the device in the same room where your router is already configured and keep it away from devices that may cause WiFi interference.

• Done with placing the extender? Now attach the given antennas in the proper manner.

• Moving on, have hold of an Ethernet cable and connect one end of the cable to the port of your extender and another end to the port of your router.

• Next, power up your extender by plugging it into a wall outlet offering an adequate and fluctuation-free power supply.

• As soon as you find the lights on your extender have started glowing green, have access to your device and connect it to the WiFi using Netgear_ext SSID.

• It’s time to launch a web browser on your device. Although you can open any web browser of your choice, however it is suggested to use the one that is updated with the latest software version and is free of browsing junk like cache, cookies, and history.

• Now, fill your default web address into the address bar of your browser.

• Mywifiext net is the default web address you can use to access the login page of your Netgear EX3700 extender. The web address supports only Windows operating system. Just in case you are making use of an iOS or MAC device to set up your extender, consider using mywifiext local as the default web address.

• Hit the Enter key to land on the Netgear extender login page.

• Reaching here, you need to type the default username and password of your EX3700 extender. If you are unaware of the login credentials, check the manual that you might have received with your extender.
• After entering the required details into their respective fields, press Log In.
• Completing the step, you will find yourself on the dashboard of your extender.
• Thereafter, navigate to settings and check the list of available WiFi networks.
• Get connected to your router’s network to proceed further with the configuration process of your Netgear EX3700 extender.
• Certain prompts will reveal on your system’s screen. Follow all the prompts and complete the Netgear EX3700 setup process using the manual method.

This is all about how can you make your extender operational using the mywifiext web address. Let us know in the comments how did you find the article on setting up a Netgear EX3700 WiFi extender. Your feedback is awaited!